Flying Tiger 10M Specifications
| THE FLYING TIGER 10M | |
| LOA | 32.65' (9.96m) |
| DWL | 30.31' (9.24 m) |
| BEAM | 9.15' (2.78 m) |
| BWL | 6.8' (2.07 m) |
| DRAFT | 7.62" (2.32 m) |
| DISP | 4900 lbs (1985 kg) |
| D/L | 81.09 |
| RM @ 1degree | 427 ft/lbs |
| Polars | Sailplan |
| Full Specs | Sail Tuning Guide |
| How to Unpack and Assemble Your FT10 | |
| To reserve your FT10M: Print, complete, and fax the Hull Reservation Agreement to (619) 435-5236. | |
The Flying Tiger 10 meter was designed to fill a void in one-designed sport boats, namely affordability. In keeping with the cost factor we were able to construct a boat utilizing technology where we felt it was needed most without incurring excessive cost.
Hull: The hull and deck is vacuum bagged, cored construction. All bulkheads and interior components molded cored construction reducing weight and need for maintenance.
Mast: The high tech mast, boom and sprit are manufactured by CST composites, Sydney Australia.
Sails: The standard sails are manufactured by Neil Pryde sails.
All deck hardware provided by Harken with the exception of the rope cluthes which are supplied by SpinLock.
Facnor rounds out the standard equipment with the roller furling for the headsail.